25/11/2013 – Bureau Veritas has audited and ratified our Quality Management System according to ISO 9001:2008. The renewal of the certification attests, once again, the good practice of the Utilcell’s quality management system in pursuit of the continual improvement and customer satisfaction of all the team.

19/11/2013 – The UTILCELL load cell Model 190i has been classified with the protection rating IP69K for use in high-pressure wash-down cleaning applications such as in the food industry, truck and vehicle cleaning and in other industrial areas. The test for the IP69K verification requires to submit the load cells to high-pressure water jets located at different angles at only 100 to 150mm with a pressure of 100bar, a temperature of 80ºC and high water flow of minimum 15l/min on

17/07/2013 – There have been various improvements in the load cell Mod.260, oil damped cell for dynamic weighing: New nominal capacities of 50, 75, 120 and 200kg for 600x600mm platforms, extending the range from 5kg to 200kg; these new capacities allow the dynamic weighing for products and larger conveyors. New encapsulation and aeration system that increases the degree of protection against humidity to IP68 and facilitate the pressure cleaning in food areas. Optimization of the damping oil for better speed

17/07/2013 – After years of experience supplying load cells in the most diverse and extreme climates around the world, we have expanded the ranges of temperature of our load cells, consolidating for the most outdoor use products working in temperature ranges -30°C to +70°C and in some products reaching limits of -40°C to +95°C, ensuring high reliability in the most demanding environments, from the Siberian climate to the Sahara.

17/07/2013 – The new software version of the Matrix II has a new internal memory permanent and unchangeable, which stores a code for each load (ticket or external PC application), capable of storing up to 10,000 records. This system enables verify that a heavy has not been modified by a PC, mandatory system in certain countries as an anti-fraud technology for business transaction scales.

17/07/2013 – Switching Power Supply for DIN rail mounting, universal power 100-240 V AC, output at 24 V DC and 15W which allows connection of 3 SWIFT indicators in the same power supply.

17/07/2013 – We extend the range of accessories with a new Silent-Block for the load cell Model 300 for 500kg.

08/05/2013 – The SWIFT is a weighing indicator and high speed transmitter, especially indicated for process weighing and machinery, in both static and dynamic applications. Thanks to its design for DIN rail mounting, as well as the various possibilities of data transmission, digital inputs and outputs, makes it ideal for connection to PLC, PC and remote systems. Typical applications: Tank and Silo weighing; Industrial Scales; Bag filling machines; Big-Bags; Dosing; Multi-head weighers; Fruit grading machines; Animal weighing; check-weighers; Laboratory testing

18/04/2013 – The new mounting kit for the load cell Model 300 (5…500kg) has been designed for a robust and accurate weighing in industrial process tanks and hoppers. The force transmission device based on a ball bearing system gives maximum repeatability and weighing accuracy, reducing lateral frictions produced by structural deflections and thermal expansions of tanks. Zinc plated and stainless steel version available.

18/12/2012 – The accessories ref. 35902 and 35903 for load cells Model 350 i/a/n 300…5000kg have been improved by incorporating a new force transmission device based on a ball bearing system. Thus, repeatability and weighing accuracy has been increased due to the reduction of lateral frictions produced by structural deflections and thermal expansions of the tanks. Zinc plated and stainless steel version available.